What's new in which version?

Version 1.017

Available since July 8, 2023

  • Serial number of house battery: The serial number can now be specified and printed on the single-line diagram.
  • Distribution resistance with decimal: The distribution resistance can now be displayed with a decimal.
  • Bugs fixed: Some users reported a bug in version 1.016. When a component with a switch was changed, the switch lost its connection to the component and could crash the program in some cases.
Version 1.016

Available since July 4, 2023

  • -
    -
  • PV installation situation diagram: It is now possible to quickly draw the location of solar panels. Also with copy and paste function.
  • -
    -Switching inverters and strings: Each inverter, but now also each string, can be switched separately.
  • -
    -Symbols in color: The symbols on the situation diagram can be displayed in different colors.
  • -
    -Power of inverter: The power of the inverter is now displayed in kVA instead of kWp
  • -
    -Scroller with mouse wheel: When the zoom function is used on a page, it can also be navigated via the mouse wheel (vertically and horizontally).
  • -
    -Created with Schematics: The mention "Created with Schematics" has been removed from the print-outs.
  • -
    -Background printing: Print the background on the situation diagram or not.
  • -
    -Bugs: Some bug fixes (including the problem with connecting switches with a consumer via the mouse).
Version 1.015

Available since June 9, 2023

  • -
    -
  • Search for unused elements: On each page, it is now possible to easily search for unused or unconnected components on the situation diagram and distribution board.
  • -
    -Multi-select by dragging with the mouse: By dragging the mouse over a part of a drawing window (distribution board, domotics distribution board, floor plan, and situation diagram), multiple components and elements can now be selected.
  • -
    -Overwrite project when importing: When importing a project, there is now the option to overwrite the project if it already exists with the same name.
  • -
    -"Save as" function: In addition to the normal save function, an open project can now also be quickly saved under a different name to create an exact copy.
  • -
    -Display of security component characteristics: The display of the characteristics of automatic switches and fault current switches has been adjusted to the new AREI. It is also possible to display the short-circuit current in kA and A (the latter enclosed in a frame) on the single-line diagram.
  • -
    -Bugs: Some bug fixes
Version 1.014

Available since June 4, 2023

  • -
    -
  • Wall length: On the floor plan, it is now possible to enter the length of walls to draw to scale. Unlike previous versions, the length can now be entered in meters and the drawing board can be calibrated so that it works for all house sizes.
  • -
    -Remove walls: When removing a wall on which components are placed in the situation diagram (stop contacts, wall lighting, etc.), it is now possible to choose to remove these components or leave them on the situation diagram.
  • -
    -Bugs: Some bug fixes
Version 1.013

Available since June 1, 2023

  • -
    -Expansion of PV installation: The drawing of a PV installation has been greatly expanded, allowing multiple strings and batteries to be connected to an inverter. All necessary data, such as manufacturer and type of inverter, solar panels, and batteries, are also included.
  • -
    -Label switches on single-line diagram: The labels given to the switches or switching components are now also printed on the single-line diagram.
  • -
    -More flexibility: The order of the switchings, kWh meters, and transformers can now be adjusted per line.
  • -
    -New symbols: The symbols for, among other things, motion detectors, inverters, etc. have been adjusted to the new AREI (in force from June 1, 2023).
  • -
    -Scaling single-line diagram: It is possible to manually scale the single-line diagram as needed.
  • -
    -Wireless domotics applications: It is now possible to display switches and lighting as wireless applications (also according to the AREI).
  • -
    -(Fire) class for cables: The fire class of the cables is now printed on the single-line diagrams.
  • -
    -Background of floor plan and cable tracing dimmable: The background used for a floor plan or cable tracing can be manually "dimmed" to keep the plans clear.
  • -
    -Addition of symbols: new symbols for speaker, intercom and siren.
  • -
    -Naming of domoticamodule outputs: the outputs/inputs of a domoticamodule can now be labeled for assignment. This label is then printed on the single-line diagram of the SELV installation. This makes planning easier.
  • -
    -Bugs: Several bug fixes
Version 1.012

Available since January 26, 2023

  • -
    -Word of explanation: This update can be seen as an interim update and is available online while a major update is being worked on, which will make it possible to create additional and detailed diagrams for PV installations and charging installations. To achieve this, a large part of the software package must be completely rewritten, which takes a lot of time. In the meantime, several smaller errors were reported that were present in the previous version, such as occasional problems with activating the license key, the disappearance of an error message when there is no connection to a counter, a problem with saving non-voltage-free input in the diagrams of the domotica installation, several translation errors into French, … That's why it was decided to launch this update in the meantime.
Version 1.011

Available since October 20, 2022

  • -
    -Symbols for fire and burglar alarm added: The symbols for both fire alarm installations and burglar alarm installations have been added. From now on, it is possible to create a situation diagram of your alarm installations. Not only the symbols are placed, but also the specified characteristics such as address, label,... The used components are also included in the parts list (with manufacturer and type if specified in the attributes).
  • -
    -Legend for alarm installation: If desired, a legend with regard to the alarm systems (fire and burglar) can also be printed. All used components with symbols and what these symbols stand for are displayed.
  • -
    -Multiselect on situation diagram for deletion: From now on, it is possible to select multiple components such as sockets, switches, lighting points, devices,... together via the CTRL key and the mouse and delete them.
  • -
    -Bugs: Several bug fixes
Version 1.010

Available since October 8, 2022

  • -
    -Cover page for electrical file: When printing the electrical diagrams, you can choose to also print a cover page (with installation address, EAN number, installer logo). The address of the installer is also mentioned on it.
  • -
    -Improvement of drawing program for floor plans: When drawing walls in the drawing program, the connection of 2 walls has been improved and the possibility has been added to draw completely closed spaces in one movement. It is also possible to adjust a already drawn wall in length and direction.
  • -
    -Multiselect on floor plan: From now on, it is possible to delete multiple structures at the same time via the CTRL key and the mouse.
  • -
    -Dimmer with internal control circuit: Until now, it was only possible to add a modular dimmer with an external control circuit. This last one had to be assigned to a circuit, which is not necessarily the same circuit as the voltage circuit. From version 1.010, a modular dimmer with an internal control circuit can also be added, whereby the push buttons are then voltage-free directly connected to the dimmer.
  • -
    -Automatic backup at location of choice: There is now the option to automatically save a backup of the project at a location of your choice (on your PC, NAS or other external storage) when closing a project.
  • -
    -Automatic scaling: When an installation consists of many "layers", the single-line diagram will be automatically adjusted in size.
  • -
    -Collapsing of "switchable" attributes: In extended installations, the list of switchable components in the attribute list of, for example, a switch can become very long. There is now the possibility to display this list standard collapsed, so you can more easily find your "switchable" component per category.
  • -
    -kWp also with comma number: In the attributes of the solar panels, you can now also enter the kWp value with a comma number.
  • -
    -Bugs: Several bug fixes
Version 1.009

Available since June 22, 2022

  • -
    -Multiselect components on situation diagram: Select multiple components (sockets, lighting points, devices,...) at once (CTRL + mouse) and assign them to a circuit. Each selected component gets a sequence number on the circuit according to the sequence of selection. Even easier, even faster.
  • -
    -Improvement of grid in distribution board and on situation diagram: The positioning of the elements in the distribution board and on the situation diagram has been improved. It is now much easier to place the components, for example, on 1 line.
  • -
    -Labels on domotica single-line diagram: On the automatically generated single-line diagram for the domotica installation, not only the circuits and circuit numbers of the connected components are mentioned, but also the "label". This makes the diagram an even better connection diagram.
  • -
    -Voltage-free outputs domotica on connection diagram: On the output of a relay module, a "signal" or voltage-free contact can now also be indicated, such as a gate contact,... This makes the single-line diagram of the domotica system an even more complete connection diagram.
  • -
    -General module under domotica: A general domotica module can now also be added to the system. This will then be displayed on the domotica single-line diagram together with the specified label (e.g. weather station,...).
  • -
    -Bugs: Several bug fixes
Version 1.008

Available since June 15, 2022

  • -
    -Load switch, switch-disconnector and load switch-disconnector: From now on, it is possible to add a manual switch to the distribution board. In this way, a load switch can be added at the beginning of a distribution board, for example.
  • -
    -Automatic differential: A loss current can now be assigned to an automatic switch to indicate that it is a differential automatic.
  • -
    -Release mechanisms: An automatic switch can now also be displayed with the type of release mechanism, such as M2 or M2+O.
  • -
    -Bugs: Several bug fixes
Version 1.007

Available since May 26, 2022

  • -
    -Transformers everywhere possible: It is no longer only possible to place transformers for a device, socket or lighting circuit, but also for an automatic switch or differential switch.
  • -
    -Label and transformer type: The type of transformer can now also be indicated and a name can be given to it. Both are displayed on the single-line diagram.
  • -
    -Transformer on the situation diagram: Created transformers can now also be placed on the situation diagram with a name.
  • -
    -kWh meters: Just like a transformer, a kWh meter can now be placed anywhere. This kWh meter can also be linked to the domotics system.
  • -
    -CTRL functions: Quick keys CTRL-Z (Undo) and CTRL-Y (Redo) were added
  • -
    -Solar panels: It is now possible to display more specifications (cable type, inverter serial number,...) on the diagrams.
  • -
    -Bugs: Several bug fixes
Version 1.006

Available since February 16, 2022

  • -
    -Favorite components: Under Distribution board, the user can now create their own favorite differential switches and automatic switches with attributes to add them quickly to the project later.
  • -
    -Background: When copying a floor plan or cable route, the background is now also copied.
  • -
    -Company data: The email address of the installer can now also be specified in the company data. This email address is then automatically filled in, together with the name, in the installer's data when creating a project.
  • -
    -Bugs: Several bug fixes
Version 1.005

Available since February 3, 2022

  • -
    -Signature: From this version, it is possible to load a signature of the installer and print it on the electrical diagrams
  • -
    -Deactivate cursor: By pressing the ESC key, the cursor function is also deactivated, reducing the unintentional placement of components.
  • -
    -Bugs: Several bug fixes
Version 1.004

Available since February 1, 2022

  • -
    -Adjust symbol size: It is now possible to adjust the size of the symbols on the situation diagram so that sockets, switches, light points,... can be placed more easily in larger projects. For example, it is now also easy to draw in A3 format.
  • -
    -Flexible printing: When printing, it is now possible to adjust the order of the pages and exclude certain pages.
  • -
    -Improved snapping: The way symbols snap or stick to walls has been adjusted to work even more accurately.
  • -
    -Improved printout: The printouts of the diagrams are sharper and of higher quality.
  • -
    -Detailed block diagram: The tree structure that schematically displays the connections of the distribution boards is replaced by a more detailed block diagram. This way, you can find out in which building and on which floor a distribution board is mounted, which component of a distribution board is connected to which component of another distribution board, with which type of cable they are connected and how they are mounted or laid.
  • -
    -Underground cable route: It is now also possible to draw an underground cable route between different buildings in a project and print it with the electrical diagrams.
  • -
    -Draw straight lines: By means of the CTRL key, it is now possible to draw straight lines very quickly.
  • -
    -Bugs: Several small bug fixes
Version 1.003

Available since December 1, 2021

  • –
    – Current flow diagram: It is now possible to specify a phase distribution per circuit (automatic switch, fuse) that then makes your single-line diagram a current flow diagram.
  • –
    – Installation procedure: The installation procedure has been adjusted and simplified. The installation now takes place with a Microsoft installation file (.msi) and no longer via a.exe file that was downloaded in a compressed folder.
  • –
    – Control system: Schematicals has been tested on Windows 11.
  • –
    – bugs: Several small bug fixes.
Version 1.002

Available since November 17, 2021

  • –
    – In production: This is the first version that was offered for sale via our website. 
  • –
    – Close project: It is now possible to close a project without having to open another project.
  • –
    – Single-line diagram domotics: The single-line diagram of a domotics or SELV installation has been extended so that it has also become a connection diagram at the same time.
  • –
    – Table External Influence Factors: a table with external influence factors can be added to the electrical diagrams.
  • –
    – Bugs: several small bug fixes
Version 1.001

Available since June 1, 2021

  • –
    – Test version: This is a test version for which a free monthly license is temporarily offered via our web shop.